Glass Machines
Designed for fused glass work. It is low energy comsumption and short start-up time. Its very well known by its reliability and safety operation due to the strong design of the machine, the safe function of all its components and the ease of maintenance and services.
Lamination Kilns
Fusion Kilns
Lamination Kilns
The laminating process which consists in the adhesion of glasses through the use of polymeric interlayer, in the last progress in safety glass production
LAM-VN: Kiln composed of n.01 chamber and a LOWER HEATING AND VENTILATION SECTION equipped with finned armoured heating elements and forced ventilation system through high pressure blowers which ensure an ideal circulation of hot air for an optimal control of the laminating and temperature process. Kiln equipped with:
- n.01 vertical door with a pneumatic opening/closing system, manually controlled or automatically program- mable in order to quicken the cooling phase
- n.04 work surfaces complete with silicone vacuum bags, Teflon mesh, vacuum valves, tubes and quick connec- tions with Viton seals
- finned armoured AISI stainless steel heating elements and high pressure blowers located inside the lower heat- ing and ventilation section
- full vacuum system with n.01 pump of European production and accessories
- high pressure blowers for forced cooling
- n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
Kiln composed of modular elements which make it adjustable through time in order to meet different production needs. The kiln can be integrated with more modules to increase the chamber’s size and relative production increase, and racks for frames with vacuum system for the storage of work surfaces and for quickening the glass preparation phase.
LAM-VB: Kiln composed by n.01 chamber e n.01 removable truck on wheels with manual handling, Heating by finned armored heating elements, n.01 control panel with TLC 56.
Electrical Air Heated Furnace For The Vacuum Lamination Of Flat And Bent Glass
LAM-VN2+2: Kiln composed of n.02 independent chambers with HEATING AND VENTILATION SECTIONS, each of them equipped with finned armoured heating elements and forced ventilation system through high pressure blowers which ensure an ideal circulation of hot air for an optimal control of the laminating and temperature process:
- n.01 lower chamber for n.02 work surfaces, with relative LOWER HEATING AND VENTILATION SECTION
- n.01 upper chamber for n.02 work surfaces, with relative UPPER HEATING AND VENTILATION SECTION
- n.01 ground section, provided with a rack with tracks for the storage of n.02 work surfaces.
Kiln equipped with:
- n.02 vertical doors with a pneumatic opening/closing system, manually controlled or automatically programmable in order to quicken the cooling phase
- n.04 work surfaces complete with silicone vacuum bags, Teflon mesh, vacuum valves, tubes and quick connections with Viton seals
- finned armoured AISI stainless steel heating elements and high pressure blowers located inside the lower and upper heating and ventilation sections
- full vacuum system with n.02 pumps of European production and accessories
high pressure blowers for forced cooling - n.01 electrical panel provided with n.02 SIEMENS PLC programmers with touch screen technology and router for teleassistance, for a separate management of the two chambers
- n.01 hydraulic lift for loading and unloading every single work level (each work surface is individually moved)
- n.01 support on wheels for n.02 reels of film.
Kiln composed of modular elements which make it adjustable through time. The two independent chambers allow different cooking cycles in every chamber in order to meet dynamic and versatile production needs. The quick heating and cooling systems, together with the trays in the storage section, best optimize the whole production cycle and make it the ideal choice in terms of versatility and productivity.
LAM-VM2: Kiln composed of n.01 chamber and a LOWER HEATING AND VENTILATION SECTION equipped with finned armoured heating elements and forced ventilation system through high pressure blowers which ensure an ideal circulation of hot air for an optimal control of the laminating and temperature process.
Kiln equipped with:
- n.02 extractable trucks on wheels with manual handling provided with a work surface complete with silicone vacuum bag, Teflon mesh, vacuum valves, tubes and quick connections with Viton seals (n.01 surface for each truck)
- finned armoured AISI stainless steel heating elements and high pressure blowers located inside the lower heating and ventilation section
- full vacuum system with n.01 pump of European production and accessories
high pressure blowers for forced cooling - n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
- n.01 support on wheels for n.02 reels of film
Innovative kiln, equipped with quick heating and cooling systems. The manual handling of the single trucks eases the operator during the loading/unloading phases and the glass preparation, without the aid of movement mechanisms. Excellent production-consumption ratio.
LAM-VM2: Kiln composed of n.01 chamber and a LOWER HEATING AND VENTILATION SECTION equipped with finned armoured heating elements and forced ventilation system through high pressure blowers which ensure an ideal circulation of hot air for an optimal control of the laminating and temperature process. Kiln equipped with:
- n.02 extractable trucks on wheels with manual handling provided with a work surface complete with silicone vacuum bag, Teflon mesh, vacuum valves, tubes and quick connections with Viton seals (n.01 surface for each truck)
- finned armoured AISI stainless steel heating elements and high pressure blowers located inside the lower heating and ventilation section
- full vacuum system with n.01 pump of European production and accessories
high pressure blowers for forced cooling - n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
- n.01 support on wheels for n.02 reels of film
Innovative kiln, equipped with quick heating and cooling systems. The manual handling of the single trucks eases the operator during the loading/unloading phases and the glass preparation, without the aid of movement mechanisms. Excellent production-consumption ratio.
Fusing Kilns
Designed for fused glass work. It is low energy consumption and short start-up time. Its very well known by its reliability and safety operation due to the strong design of the machine, the safe function of all its components and the ease of maintenance and services.
Smallest Kiln for Fusing Glass
Possibility of automatic programmable movement of the truck. Visual control of the cooking progress. Kiln available in different internal heights with the option of heating elements on the basis supported by ceramic tubes and/ or command for additional heating elements. Possibility of adding at a later time a second truck for greater production needs and truck coverings to quicken the production process.
Single-layer electrical kiln equipped with a truck by manual handling, provided with:
- n.01 top heating section with heating elements supported by quartz tubes
- n.01 truck on wheels for sliding on guide rails by manual handling
- n.01 hydraulic control unit for manual or automatic programmable actuation of the lifting pistons of the heating section
- control system of heat distribution in 3 zones and further temperature detection for safety threshold n.01 high pressure blower for forced cooling system which significantly reduces the firing cycle time
- n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
- steel frame + ceramic fibre floor for flat glass processing
- sight glasses for the visual control of the cooking.
Perfect Kiln For Fusing Class
Kilns with the possibility of automatic opening at the end of the cycle to quicken the cooling process. Visual control of the cooking progress. Available in different internal heights with the option of heating elements on the basis supported by ceramic tubes and/or command for additional heating elements.
Kilns can be equipped with Siemens PLC programmer with touch- screen technology and router for teleassistance, to meet the 4.0 INDUSTRY requirements.
Fixed hearth kilns with one single work surface, equipped with:
- tubular structure and external panelling with pickled painted plate
- n. 01 heating chamber with internal insulation in high density ecological ceramic fibre
- clamshell-style opening system, with manual and automatic programmable opening/closing by means of pneumatic pistons with safety block system
- heating from above with heating elements supported by quartz tubes
ventilation nozzles - n.01 programmer to save and manage the cooking cycles
- steel frame + ceramic fibre floor for flat glass processing
- sight glasses for the visual control of the cooking.
Largest Kiln for Fusing Glass
Kiln with the possibility of automatic opening at the end of the cycle to quicken the cooling process. Visual control of the cooking progress. Available in different internal heights with the option of heating elements on the basis supported by ceramic tubes and/or command for additional heating elements. Possibility of adding a second truck at a later time for greater production needs.
Kilns can be equipped with Siemens PLC programmer with touch- screen technology and router for teleassistance, to meet the 4.0 INDUSTRY requirements.
Perfect Kiln For Fusing Class
Kiln equipped with independent trucks which allow different cooking cycles in order to meet dynamic and versatile production needs. Predisposition for ongoing cycles without the aid of operators.
Visual control of the cooking progress. Kiln available in different internal heights with the option of heating elements on the basis supported by ceramic tubes and/ or command for additional heating elements. Possibility of adding truck coverings to quicken the production process.
Electrical kiln equipped with n.02 trucks by manual and automatic programmable handling, provided with:
- n.01 top heating section with heating elements supported by quartz tubes
- n.02 trucks on wheels for sliding on guide rails by manual or automatic programmable handling
- n.01 hydraulic control unit for manual or automatic programmable actuation of the lifting pistons of the heating section
- control system of heat distribution in 3 zones and further temperature detection for safety threshold
- n.01 high pressure blower for forced cooling system which significantly reduces the firing cycle time
- gates or barriers for the operator’s safety: in case of accidental or automatic activation, the system blocks the movement of the trucks and the heating hood (the cooking cycle in the truck is not stopped)
- n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
- steel frame + ceramic fibre floor for flat glass processing
- sight glasses for the visual control of the cooking.
Perfect Kiln For Fusing Class
Kiln equipped with independent trucks which allow different cooking cycles in order to meet dynamic and versatile production needs. Predisposition for ongoing cycles without the aid of operators.
Visual control of the cooking progress. Kiln available in different internal heights with the option of heating elements on the basis supported by ceramic tubes and/ or command for additional heating elements. Possibility of adding truck coverings to quicken the production process.
Electrical kiln equipped with n.02 trucks by manual and automatic programmable handling, provided with:
- n.01 top heating section with heating elements supported by quartz tubes
- n.02 trucks on wheels for sliding on guide rails by manual or automatic programmable handling
- n.01 hydraulic control unit for manual or automatic programmable actuation of the lifting pistons of the heating section
- control system of heat distribution in 3 zones and further temperature detection for safety threshold
- n.01 high pressure blower for forced cooling system which significantly reduces the firing cycle time
- gates or barriers for the operator’s safety: in case of accidental or automatic activation, the system blocks the movement of the trucks and the heating hood (the cooking cycle in the truck is not stopped)
- n.01 electrical panel provided with SIEMENS PLC programmer with touch screen technology and router for teleassistance
- steel frame + ceramic fibre floor for flat glass processing
- sight glasses for the visual control of the cooking.