Stefiglass Machines
Stefiglass International is a leading manufacturer in the world for a wide range of glass washing machines, complete IG lines and complementary equipment.
Vertical Washing Machine
Complete Insulated Glass Line
Vertical Washing machine
SUPER
This is a machine with fully stainless steel structure with front doors and internal spray-proof lexan.
It is a vertical washing machine optimised for glass production Insulating, particularly suitable for intense and continuous use. Thank you to its 6 brushes meet the standards for industrial cleaning between the highest. Made exclusively in closed version, it allows wash a minimum glass of L 320mm H 150mm.
The SUPER model is available in the following versions:
Introduce Fully stainless steel washing/res rinsing sections with drying area.Enter both areas of the machine are accessible Opening the doors. The mechanical movement is placed in the lower part, under the base. The motorization of the brushes is placed in top, consisting of 2 motors for 4 brushes and 4 motors for version with 6 brushes. The LOW-E configuration of brushes includes Ny015 front brushes and rear brushes Ny020.The drying section is composed of blowers, powered by a high pressure ventilator. The air coming out of the fan is hot.
The glass plate in the washing and drying section is guided by Wheels. wheels. Washable thickness from 3 to 20 mm without any adjustment. Every Separate section of the machine can be controlled by a panel control placed on the exit side of the glass.The working speed the machine ranges from 1 to 5 m/min
SPRINT
This is a vertical washing machine suitable for washing glass panels.
Built exclusively in “open top” version. Minimum dimensions washable in Glass L 300mm H 150mm. It consists of a washing section / rinse completely in stainless steel followed by a large the drying section. Both sections of the machine are accessible by removable envelope, soundproofed in the area of drying.
The mechanical movement is placed in the lower part, under the base. So also is placed the motorization for the brushes, consisting of a single engine.
The working speed of the machine ranges from 1 to 5 m / min
The SPRINT model is available in the following versions:
OPTIONAL on request:
- Closed circuit with water treatment system (not compatible with applications on the production of processed glass)
- Pre-wash section
- Front brushes for LOW-E
- Color of your choice
LV 3300 JUMBO
Yes, it’s It is a vertical washing machine optimized for cleaning large glass plates, particularly suitable for heavy duty and Continuous.
Thank you at its 6 brushes, the machine meets the cleaning standards industrial among the highest. is particularly suitable for In-line applications, which can also be combined with robotic systems. Made exclusively in a closed top version, it allows to wash a Minimum glass of L-450 mm Hx250 mm.
The washing machine is equipped with a washing/rense area totally in steel stainless steel combined with a drying area. The two parts are separate and are connected during the on-site installation (condition required for Easy to carry the machine).
Both of them the areas of the machine are accessible by opening doors, equipped with in the drying part of micro electrical safety.
The JUMBO model is available in the following versions:
The mechanical handling is placed at the bottom, below the basement. At the top is placed the motorization for brushes, consisting of an engine for each brush. The Standard configuration of brushes provides for the front ones of the low-e type and the rear ones for normal glass.
- Machine made of two parts: washing and drying.
- Easy to install and fast transport thanks to its sectioning.
- It uses 6 brushes for washing, with high hydraulic efficiency pumps. The pumps only mount stainless steel impellers.
- Drying is guaranteed by a ventilation system at 29 kW.
- The Le brushes are driven by inverter system with ramp of acceleration/deceleration to optimize mechanical and the reliability over time.
- The upper frame is made of AISI 304 tubular structure bearing and body with Stainless steel sheets laser cut. This ensures high speed operational with highly contained vibrations.
- Operating speed from 1 to 5m/min
Complete Insulated Glass Lines
Our lines are the natural completion of our washing systems for the production of double glazing, meeting the highest quality standards. They have an independent control unit which allows them to be combined even with other washing machines. Our solutions are as follows:
Characteristics of the
Stefiglass COMPACT LINE
It is a very particular line, which combines the features of a semi-automatic system with a particular coupling sequence that make it extremely efficient in cycle times and compact in terms of total length. The line includes a patent end semi-automatic assembly area, where a precise slab stop point with aids for aligning the interspace are placed.
The line is completed by a coupling system with a 2500 mm wide panel press.The system is available in two heights: 1600 and 2000 mm. If the slabs exceed 2400 mm in length, a two-stage pressing can be activated, which guarantees high quality without exceeding the overall dimensions of the line.
Characteristics of the
Stefiglass SEMI AUTOMATIC LINE
It is an extremely practical and efficient line, intuitive to use. The line includes a semi-automatic assembly area, in which a precise slab stop point is placed, with aids for aligning the interspace. The line is completed by a coupling system with panel press 2500 mm wide or with rollers. The system is available in two heights: 1600 and 2000 mm.
If the slabs exceed 2400 mm in length, a two-stage pressing can be activated, which guarantees high quality without exceeding the overall dimensions of the line. Optional there is the folding table to be placed at the end of the line, useful for sealing large glass on site.
Characteristics of the
Stefiglass AUTOMATIC LINE
It is a line designed for demanding industrial productions, in which the system must be operator-dependent in the least possible way. The line has an automatic assembly area, where the only operation performed by the operator is to apply the previously prepared channel and put it to the first glass panel. The line is completed by a coupling system with panel press 2500 mm wide or with rollers. The system is available in four heights: 1600, 2000, 2300, 2500 mm.
If the slabs exceed 2400 mm in length, a two-stage pressing can be activated to guarantee high quality without exceeding the overall dimensions of the line. As standard, the machine can create display cases by activating the dedicated function present in the machine control program. Optional is the program for the automatic production of triple glazing or the tilting table to be placed at the end of the line, useful for sealing large glazing on site.
Characteristics of the
PRESS ASSEMBLY LINE Stefiglass
It is a line designed for demanding industrial productions, in which the system must be as operator-dependent in the least possible way. The line has an area for laying the channel, in which the only operation performed by the operator is to apply the previously prepared channel. The line is completed by a coupling system with panel press 2500 mm wide. T
he system is available in four heights: 1600, 2000, 2300, 2500 mm. If the sheets exceed the length of 2400 mm, a two-stage pressing can be activated, which guarantees high quality without exceeding the overall dimensions of the line. As standard, the machine can create display cases, automatically detecting the dimensions of the worked slabs.
By simply acting on the steering unit, the triple glazing function can be activated. Optional there is the program for the production of staggered glass (structural applications) up to a maximum of 70 mm in each direction. The line can be further completed by inserting the tilting table to be placed at the end, useful for sealing large glasses on site.
